| Reload Frameset | Home | German Pages |
Drum Setup 1+2:
Each drum instrument is controllable individually!
Contents:- Introduction
- Table of all Drum Setup 1 settings
- Table of all Drum Setup 2 settings
- Additional drum kits in Part mode 'Drum'
1. Introduction
In Part mode 'Drum Setup 1' or 'Drum Setup 2' each instrument of a drum kit can be controlled with 16 different drum setup parameters. Additionally it is possible to change some of these parameters via NRPN controllers as decribed on page System + MIDI CTRL. By XG default Part 10 (09h) is in mode 'Drum Setup 1' and all other Parts are in 'Normal/Voice mode'. You have to enable mode 'Drum Setup 2' for another Part than Part 10 if you want to use a second fully controllable drum kit. You should prefer part 1 for an accurate drum timing, because this Part has a high priority (the XG Part priority list is 10, 1, 2 ... 9, 11, 12 ... 16 from highest to lowest). For this reason it's not recommended to use Parts with high numbers for drum kits.With Part mode 'Drum' you can use more than 2 drum kits simultaneously, but you won't be able to adjust drum instrument settings in this mode. You should prefer Part 2, 3, ... for additional drum kits in mode 'Drum'to get the most accurate drum timing.
The following tables contain all available Drum setup parameters and additionally some of the most important Part parameters, which I've listed completely at page 'Part Setup'. You always have to replace the variable NN in the SysEx strings with a valid Part number (00h-0Fh), the variable RR with a valid Note number (0Dh-5Bh) and the variable XX with a valid hexadecimal data entry. The valid data range of each command you can find in column 'Data Range', the default value is shown in column 'Default Value'.
Important:
Some of the commands in the tables below are only available with some XG synths (MU90, MU100 or SW1000XG) - such commands appear in grey colour.
Additional notes for MU100 and SW1000XG user:
The Yamaha synths MU100 and SW1000XG offer additionally the Part modes 'Drum Setup 3 and 4' - so with those synth you're able to use up to four drum kits simultaneously! These additional Part modes can be activated with XX=04h or 05h (=Drum Setup 3 or 4) at command PART MODE. Both synths also offer 32 Parts - for this reason the valid data range for NN is 00h-1Fh (=Part 1-32).
The available 20 Drum instrument parameters of Drum Setup 3 and 4 are nearly the same commands as described at Drum instrument settings of Drum Setup 1. You just have to replace the 30 in this SysEx strings with 32 or 33 instead:
F0,43,10,4C,32,RR,*00-40*,XX,F7 (Drum Setup 3)
F0,43,10,4C,33,RR,*00-40*,XX,F7 (Drum Setup 4)
The commands DRUM SETUP RESET for Drum Setup 3 and 4 are:
F0,43,10,4C,00,00,7D,02,F7 (=DRUM SETUP 3 RESET)
F0,43,10,4C,00,00,7D,03,F7 (=DRUM SETUP 4 RESET).
Back to the top
2. Table of all Drum Setup 1 settings
A. Basic Part settingsB. Drum instrument settings
| A. Basic Part settings | ||||
| SysEx String (Hex), NN=Part Number: 00h-0Fh (0d-15d) |
Data Range Hex (Dec) |
Parameter | Description | Default Value Hex (Dec) |
| F0,43,10,4C,08,NN,07,XX,F7 | 00h - 03h (0d - 3d) |
PART MODE (Value 02h will enable mode 'Drum Setup 1' for Part NN; by XG default Part 10 (09h) is in mode 'Drum Setup 1'.) |
(0:NORMAL 1:DRUM) 2:DRUM SETUP 1 (3:DRUM SETUP 2) |
Part 10: 02h (2d), Other than Part 10: 00h (0d) |
| F0,43,10,4C,00,00,7D,00,F7 | DRUM SETUP 1 RESET | The Drum Reset Message will initialize the default setting of each Drum Setup parameter depending on the loaded drum kit. | ||
| F0,43,10,4C,08,NN,06,XX,F7 | 00h - 02h (0d - 2d) |
SAME NOTE NUMBER KEY ON ASSIGN (With value 02h (=INST) you can set-up this parameter for each Drum instrument individually using command KEY ASSIGN of the Drum Setup parameters.) |
0:SINGLE 1:MULTI 2:INST (for Drum) |
01h (1d) |
| F0,43,10,4C,08,NN,0B,XX,F7 | 00h - 7Fh (0d - 127d) |
VOLUME | 0 - 127 | 64h (100d) |
| F0,43,10,4C,08,NN,0E,XX,F7 | 00h - 7Fh (0d - 127d) |
PANORAMA (The Part-Panorama should keep in position 'Center', because each Drum instrument has it's own Drum Setup command PANORAMA.) |
O:Random, 1...64...127: Left...Center...Right |
40h (64d) |
| F0,43,10,4C,08,NN,11,XX,F7 | 00h - 7Fh (0d - 127d) |
DRY LEVEL (Only available, if the Part has been assigned to the Variation effect in insertion mode.) |
0 - 127 | 7Fh (127d) |
| F0,43,10,4C,08,NN,12,XX,F7 | 00h - 7Fh (0d - 127d) |
CHORUS SEND (The Chorus amount of each drum instrument can be set-up individually with the Drum Setup command CHORUS SEND.) |
0 - 127 | 00h (0d) |
| F0,43,10,4C,08,NN,13,XX,F7 | 00h - 7Fh (0d - 127d) |
REVERB SEND (The Reverb amount of each drum instrument can be set-up individually with the Drum Setup command REVERB SEND.) |
0 - 127 | 28h (40d) |
| F0,43,10,4C,08,NN,14,XX,F7 | 00h - 7Fh (0d - 127d) |
VARIATION SEND (Only available, if the Variation effect is in system mode. The Variation amount of each drum instrument can be set-up individually with the Drum Setup command VARIATION SEND.) |
0 - 127 | 00h (0d) |
| B. Drum instrument settings | ||||
| SysEx String (Hex) RR=Note Number: 0Dh - 5Bh (13d - 91d) |
Data Range Hex (Dec) |
Parameter | Description | Default Value Hex (Dec) |
| F0,43,10,4C,30,RR,00,XX,F7 | 00h - 7Fh (0d - 127d) |
PITCH COARSE | 0...64...127: -64...0...+63 |
40h (64d) |
| F0,43,10,4C,30,RR,01,XX,F7 | 00h - 7Fh (0d - 127d) |
PITCH FINE | 0...64...127: -64...0...+63 (Cent) |
40h (64d) |
| F0,43,10,4C,30,RR,02,XX,F7 | 00h - 7Fh (0d - 127d) |
LEVEL | 0 - 127 | Depend on the note |
| F0,43,10,4C,30,RR,03,XX,F7 | 00h - 7Fh (0d - 127d) |
ALTERNATE GROUP | 0:OFF, 1 - 127 | Depend on the note |
| F0,43,10,4C,30,RR,04,XX,F7 | 00h - 7Fh (0d - 127d) |
PANORAMA | O:Random, 1...64...127: Left...Center...Right |
Depend on the note |
| F0,43,10,4C,30,RR,05,XX,F7 | 00h - 7Fh (0d - 127d) |
REVERB SEND (REVERB SEND of the Part must be enabled to apply the effect.) |
0 - 127 | Depend on the note |
| F0,43,10,4C,30,RR,06,XX,F7 | 00h - 7Fh (0d - 127d) |
CHORUS SEND (CHORUS SEND of the Part must be enabled to apply the effect.) |
0 - 127 | Depend on the note |
| F0,43,10,4C,30,RR,07,XX,F7 | 00h - 7Fh (0d - 127d) |
VARIATION SEND (VARIATION SEND of the Part must be enabled to apply the effect.) |
0 - 127 | 7Fh (127d) |
| F0,43,10,4C,30,RR,08,XX,F7 | 00h - 01h (0d - 1d) |
KEY ASSIGN (This command will take effect only, if command SAME NOTE NUMBER KEY ON ASSIGN of the Part is switched to 'INST'.) |
0:SINGLE, 1:MULTI |
00h (0d) |
| F0,43,10,4C,30,RR,09,XX,F7 | 00h - 01h (0d - 1d) |
RECEIVE NOTE OFF | 0:OFF, 1:ON |
Depend on the note |
| F0,43,10,4C,30,RR,0A,XX,F7 | 00h - 01h (0d - 1d) |
RECEIVE NOTE ON | 0:OFF, 1:ON |
01h (1d) |
| F0,43,10,4C,30,RR,0B,XX,F7 | 00h - 7Fh (0d - 127d) |
FILTER CUTOFF FREQUENCY | 0...64...127: -64...0...+63 |
40h (64d) |
| F0,43,10,4C,30,RR,0C,XX,F7 | 00h - 7Fh (0d - 127d) |
FILTER RESONANCE | 0...64...127: -64...0...+63 |
40h (64d) |
| F0,43,10,4C,30,RR,0D,XX,F7 | 00h - 7Fh (0d - 127d) |
EG ATTACK RATE | 0...64...127: -64...0...+63 |
40h (64d) |
| F0,43,10,4C,30,RR,0E,XX,F7 | 00h - 7Fh (0d - 127d) |
EG DECAY1 RATE | 0...64...127: -64...0...+63 |
40h (64d) |
| F0,43,10,4C,30,RR,0F,XX,F7 | 00h - 7Fh (0d - 127d) |
EG DECAY2 RATE | 0...64...127: -64...0...+63 |
40h (64d) |
| Note-EQ Settings (only available at a MU90, MU100 or SW1000XG!) | ||||
| F0,43,10,4C,30,RR,20,XX,F7 | 00h - 7Fh (0d - 127d) |
EQ BASS GAIN | 0...64...127: -12...0...+12 (dB) |
40h (64d) |
| F0,43,10,4C,30,RR,21,XX,F7 | 00h - 7Fh (0d - 127d) |
EQ TREBLE GAIN | 0...64...127: -12...0...+12 (dB) |
40h (64d) |
| F0,43,10,4C,30,RR,24,XX,F7 | 04h - 28h (4d - 40d) |
EQ BASS FREQUENCY | 32 - 2,000 (Hz) View: Table 3 |
0Ch (12d) (=80 Hz) |
| F0,43,10,4C,30,RR,25,XX,F7 | 1Ch - 3Ah (28d - 58d) |
EQ TREBLE FREQUENCY | 500 - 16,000 (Hz) View: Table 3 |
36h (54d) (=10,000 Hz) |
| Note-Routing (only available at a SW1000XG with connected DS2416 extension!) | ||||
| F0,43,10,4C,30,RR,40,XX,F7 | 00h (0d) 08h (8d) 09h (9d) 0Ah (10d) 28h (40d) 29h (41d) 2Ah (42d) 2Bh (43d) 2Ch (44d) 2Dh (45d) |
OUTPUT SELECT (These settings are available only at a SW1000XG with connected 'DS2416' extension! The DS2416 extension is purchased with a digital optical eight channel ADAT output with the possibility to send Stereo-Out L/R and Individual Out 1-6 separately to connected audio devices with an ADAT compatible input.) |
0d = Stereo Out 8d = Individual 1+2 9d = Individual 3+4 10d = Individual 5+6 40d = Individual 1 41d = Individual 2 42d = Individual 3 43d = Individual 4 44d = Individual 5 45d = Individual 6 |
00h (0d) |
3. Table of all Drum Setup 2 settings
A. Basic Part settingsB. Drum instrument settings
| A. Basic Part settings | ||||
| SysEx String (Hex), NN=Part Number: 00h-0Fh (0d-15d) |
Data Range Hex (Dec) |
Parameter | Description | Default Value Hex (Dec) |
| F0,43,10,4C,08,NN,07,XX,F7 | 00h - 03h (0d - 3d) |
PART MODE (Value 03h will enable mode 'Drum Setup 2' for Part NN; you should prefer Part 1 (00h) for a second drum kit.) |
(0:NORMAL 1:DRUM 2:DRUM SETUP 1) 3:DRUM SETUP 2 |
Part 10: 02h (2d), Other than Part 10: 00h (0d) |
| F0,43,10,4C,00,00,7D,01,F7 | DRUM SETUP 2 RESET | The Drum Reset Message will initialize the default setting of each Drum Setup parameter depending on the loaded drum kit. | ||
| F0,43,10,4C,08,NN,06,XX,F7 | 00h - 02h (0d - 2d) |
SAME NOTE NUMBER KEY ON ASSIGN (With value 02h (=INST) you can set-up this parameter for each Drum instrument individually using command KEY ASSIGN of the Drum Setup parameters.) |
0:SINGLE, 1:MULTI 2:INST (for Drum) |
01h (1d) |
| F0,43,10,4C,08,NN,0B,XX,F7 | 00h - 7Fh (0d - 127d) |
VOLUME | 0 - 127 | 64h (100d) |
| F0,43,10,4C,08,NN,0E,XX,F7 | 00h - 7Fh (0d - 127d) |
PANORAMA (The Part-Panorama should keep in position 'Center', because each Drum instrument has it's own Drum Setup command PANORAMA.) |
O:Random, 1...64...127: Left...Center...Right |
40h (64d) |
| F0,43,10,4C,08,NN,11,XX,F7 | 00h - 7Fh (0d - 127d) |
DRY LEVEL (Only available, if the Part has been assigned to the Variation effect in insertion mode) |
0 - 127 | 7Fh (127d) |
| F0,43,10,4C,08,NN,12,XX,F7 | 00h - 7Fh (0d - 127d) |
CHORUS SEND (The Chorus amount of each drum instrument can be set-up individually with the Drum Setup command CHORUS SEND.) |
0 - 127 | 00h (0d) |
| F0,43,10,4C,08,NN,13,XX,F7 | 00h - 7Fh (0d - 127d) |
REVERB SEND (The Reverb amount of each drum instrument can be set-up individually with the Drum Setup command REVERB SEND.) |
0 - 127 | 28h (40d) |
| F0,43,10,4C,08,NN,14,XX,F7 | 00h - 7Fh (0d - 127d) |
VARIATION SEND (Only available, if the Variation effect is in system mode. The Variation amount of each drum instrument can be set-up individually with the Drum Setup command VARIATION SEND.) |
0 - 127 | 00h (0d) |
| B. Drum instrument settings | ||||
| SysEx String (Hex) RR=Note Number: 0Dh - 5Bh (13d - 91d) |
Data Range Hex (Dec) |
Parameter | Description | Default Value Hex (Dec) |
| F0,43,10,4C,31,RR,00,XX,F7 | 00h - 7Fh (0d - 127d) |
PITCH COARSE | 0...64...127: -64...0...+63 |
40h (64d) |
| F0,43,10,4C,31,RR,01,XX,F7 | 00h - 7Fh (0d - 127d) |
PITCH FINE | 0...64...127: -64...0...+63 (Cent) |
40h (64d) |
| F0,43,10,4C,31,RR,02,XX,F7 | 00h - 7Fh (0d - 127d) |
LEVEL | 0 - 127 | Depend on the note |
| F0,43,10,4C,31,RR,03,XX,F7 | 00h - 7Fh (0d - 127d) |
ALTERNATE GROUP | 0:OFF, 1 - 127 | Depend on the note |
| F0,43,10,4C,31,RR,04,XX,F7 | 00h - 7Fh (0d - 127d) |
PANORAMA | O:Random, 1...64...127: Left...Center...Right |
Depend on the note |
| F0,43,10,4C,31,RR,05,XX,F7 | 00h - 7Fh (0d - 127d) |
REVERB SEND (REVERB SEND of the Part must be enabled to apply the effect.) |
0 - 127 | Depend on the note |
| F0,43,10,4C,31,RR,06,XX,F7 | 00h - 7Fh (0d - 127d) |
CHORUS SEND (CHORUS SEND of the Part must be enabled to apply the effect.) |
0 - 127 | Depend on the note |
| F0,43,10,4C,31,RR,07,XX,F7 | 00h - 7Fh (0d - 127d) |
VARIATION SEND (VARIATION SEND of the Part must be enabled to apply the effect.) |
0 - 127 | 7Fh (127d) |
| F0,43,10,4C,31,RR,08,XX,F7 | 00h - 01h (0d - 1d) |
KEY ASSIGN (This command will take effect only, if command SAME NOTE NUMBER KEY ON ASSIGN of the Part is switched to 'INST'.) |
0:SINGLE, 1:MULTI |
00h (0d) |
| F0,43,10,4C,31,RR,09,XX,F7 | 00h - 01h (0d - 1d) |
RECEIVE NOTE OFF | 0:OFF, 1:ON |
Depend on the note |
| F0,43,10,4C,31,RR,0A,XX,F7 | 00h - 01h (0d - 1d) |
RECEIVE NOTE ON | 0:OFF, 1:ON |
01h (1d) |
| F0,43,10,4C,31,RR,0B,XX,F7 | 00h - 7Fh (0d - 127d) |
FILTER CUTOFF FREQUENCY | 0...64...127: -64...0...+63 |
40h (64d) |
| F0,43,10,4C,31,RR,0C,XX,F7 | 00h - 7Fh (0d - 127d) |
FILTER RESONANCE | 0...64...127: -64...0...+63 |
40h (64d) |
| F0,43,10,4C,31,RR,0D,XX,F7 | 00h - 7Fh (0d - 127d) |
EG ATTACK RATE | 0...64...127: -64...0...+63 |
40h (64d) |
| F0,43,10,4C,31,RR,0E,XX,F7 | 00h - 7Fh (0d - 127d) |
EG DECAY1 RATE | 0...64...127: -64...0...+63 |
40h (64d) |
| F0,43,10,4C,31,RR,0F,XX,F7 | 00h - 7Fh (0d - 127d) |
EG DECAY2 RATE | 0...64...127: -64...0...+63 |
40h (64d) |
| Note-EQ Settings (only available at a MU90, MU100 or SW1000XG!) | ||||
| F0,43,10,4C,31,RR,20,XX,F7 | 00h - 7Fh (0d - 127d) |
EQ BASS GAIN | 0...64...127: -12...0...+12 (dB) |
40h (64d) |
| F0,43,10,4C,31,RR,21,XX,F7 | 00h - 7Fh (0d - 127d) |
EQ TREBLE GAIN | 0...64...127: -12...0...+12 (dB) |
40h (64d) |
| F0,43,10,4C,31,RR,24,XX,F7 | 04h - 28h (4d - 40d) |
EQ BASS FREQUENCY | 32 - 2,000 (Hz) View: Table 3 |
0Ch (12d) (=80 Hz) |
| F0,43,10,4C,31,RR,25,XX,F7 | 1Ch - 3Ah (28d - 58d) |
EQ TREBLE FREQUENCY | 500 - 16,000 (Hz) View: Table 3 |
36h (54d) (=10,000 Hz) |
| Note-Routing (only available at a SW1000XG with connected DS2416 extension!) | ||||
| F0,43,10,4C,31,RR,40,XX,F7 | 00h (0d) 08h (8d) 09h (9d) 0Ah (10d) 28h (40d) 29h (41d) 2Ah (42d) 2Bh (43d) 2Ch (44d) 2Dh (45d) |
OUTPUT SELECT (These settings are available only at a SW1000XG with connected 'DS2416' extension! The DS2416 extension is purchased with a digital optical eight channel ADAT output with the possibility to send Stereo-Out L/R and Individual Out 1-6 separately to connected audio devices with an ADAT compatible input.) |
0d = Stereo Out 8d = Individual 1+2 9d = Individual 3+4 10d = Individual 5+6 40d = Individual 1 41d = Individual 2 42d = Individual 3 43d = Individual 4 44d = Individual 5 45d = Individual 6 |
00h (0d) |
4. Additional drum kits in Part mode 'Drum'
| Part Settings | ||||
| SysEx String (Hex), NN=Part Number: 00h-0Fh (0d-15d) |
Data Range Hex (Dec) |
Parameter | Description | Default Value Hex (Dec) |
| F0,43,10,4C,08,NN,07,XX,F7 | 00h - 03h (0d - 3d) |
PART MODE (Value 01h will enable mode 'Drum' for Part NN; you should prefer Parts 2, 3 (01h, 02h) for additional drum kits) |
(0:NORMAL) 1:DRUM (2:DRUM SETUP 1 3:DRUM SETUP 2) |
Part 10: 02h (2d), Other than Part 10: 00h (0d) |
| F0,43,10,4C,08,NN,0B,XX,F7 | 00h - 7Fh (0d - 127d) |
VOLUME | 0 - 127 | 64h (100d) |
| F0,43,10,4C,08,NN,0E,XX,F7 | 00h - 7Fh (0d - 127d) |
PANORAMA | O:Random (zufällig), 1...64...127: Left...Center...Right |
40h (64d) |
| F0,43,10,4C,08,NN,11,XX,F7 | 00h - 7Fh (0d - 127d) |
DRY LEVEL (Only available, if the Part has been assigned to the Variation effect in insertion mode) |
0 - 127 | 7Fh (127d) |
| F0,43,10,4C,08,NN,12,XX,F7 | 00h - 7Fh (0d - 127d) |
CHORUS SEND | 0 - 127 | 00h (0d) |
| F0,43,10,4C,08,NN,13,XX,F7 | 00h - 7Fh (0d - 127d) |
REVERB SEND | 0 - 127 | 28h (40d) |
| F0,43,10,4C,08,NN,14,XX,F7 | 00h - 7Fh (0d - 127d) |
VARIATION SEND (Only available, if the Variation effect is in system mode) |
0 - 127 | 00h (0d) |
| Note: In mode 'Drum' single drum instruments are not controllable individually. | ||||
C/O 2002-2012: Werner Ogrodnik (Cologne, Germany)